............................................................................................................
Digi Summit 3000 Series Low Profile Floor Scale w/ Digi 120 Digital Indicator
Applications
• Legal-for-trade
• Pallet weighing
• Shipping and receiving
Product Features
• Four NTEP certified alloy steel shear beam load cells
• Top access J-box
• Rugged diamond safety treadplate steel deck
• Four adjustable rigid polyurethane rubber feet, 3" (76.2 mm)
diameter
• Signal trim summing board housed in ABS enclosure
• Threaded eyebolt hole located in the center of the deck for easy lifting
• 20 ft. of EL147 load cell cable
Options & Accessories
• Access ramps
• Pit frames
• Floor anchor plates, mild steel (set of two)
• 14-pin load cell connector, Amphenol
• 14-pin connector with 20 ft cable
• Top access foot adjust holes
Description & Capacities
Platform Size Capacities
3' x 3' x 3.625" 2000 lb/1000 kg
4' x 4' x 3.625" 2000 lb/1000 kg
4' x 4' x 3.625" 5000 lb/2500 kg
4' x 4' x 3.625" 10,000 lb/5000 kg
5' x 5' x 3.625" 5000 lb/2500 kg
5' x 5' x 3.625" 10,000 lb/5000 kg
Approvals
NTEP
Digi 120 Digital Weight Indicator
Applications
• Portable floor and bench scales
• Setpoint filling applications
• Straight weighing
Description
As an economical choice in material handling and shipping and receiving
applications, the 120 is a practical indicator with floor and bench
scales.
The 120 drives up to four 350 or eight 700 load cells. It also features
three-stage digital filtering, providing stable, accurate weight data.
The five-button front panel provides easy operation, as well as full
calibration and configuration.
Two independent communication ports provide full EDP and print ticket
programmability—a feature that is enhanced by Revolution™ III Scale
Software. In addition, the two standard serial ports allow it to be
remotely configured using Revolution III Scale Software.
Special Features
Large .8" (20.3 mm) Light Emitting Diode (LED) Display
Configurable analog to digital measurement rate
Power for four 350 load cells
Load cell quick disconnect plug
Primary/secondary units configuration: lb, kg, ounces, grams
5-button operation
Two independent communication ports: (1) full duplex, (1) unidirectional
or active 20 mA current loop
Standardized EDP command sets
Programmable ticket formats up to two 300-character printouts
Full front-panel digital calibration and configuration
Tilt stand
Three-stage digital filtering
Consecutive transaction numbering
