NCI Weigh-Tronix 7820 Balltop platter Scale AWT05-508639 Replaces 9503-16509

NCI 7820 Parcel Shipping Scale SS Platter 150 lb.

$1,230.00

Features & Benefits of 7820 by Avery Weigh-Tronix, item AWT05-508640 are accurate and reliable Fast digital response - Speeds weight processing time -- Compact low profile base - Fits easily into any operation and provides convenient mobility. -- RS-232 bi-directional output. Uses standard PC cable to 9-pin "D" connector on scale. Capacity: 150 lbs SS Platter: 12"x14". Replaces NCI 9503-16505.

AWT05-508640

Avery Weigh-Tronix 7820 12” x 14” shipping scale provides a fast accurate weight reading that fits into any operation as a stand-alone scale, interfaced to a shipping manifest software or receiving station. Designed with a hard wearing stainless steel weight platter and a rugged aluminum die cast housing and load bridge that offers outstanding protect to the centrally mounted aluminum analog load cell. Supplied with a built-in, flush-fitting, six digit ½” high LCD display that is mounted in the front face of the base. An optional second remote display can be plugged in to give a customer facing weight reading. Some customers even consider this the best shipping scale for small business.

A range of emulation protocols are available within the scale to allow you to quickly select the correct compatible communication protocol to interface with a wide range of third party post, mail and shipping software programs or host devices. This will be communicated through either a serial RS232, USB (HID) or USB (VCP) port found on the rear of the base. Ideal for busy, demanding parcel and shipping applications. Connectivity 1 x RS232 (9 way female D Type connector ), 1 x USB HID (Mini USB) or 1x USB VCP (USB-Type B) 1 x 2nd Remote display connection (RJ 45). All are positioned on the rear of the base

NCI 7820 9503-16505
NCI 7820 Shipping Scale
Old P/N: 9503-16505 / New P/N: AWT05-508640

Fast digital response - Speeds weight processing time

Compact low profile base - Fits easily into any operation and provides convenient mobility.

RS-232 bi-directional output - Allows for connection to a computer or smart terminal.
Uses standard PC cable to 9-pin "D" connector on scale.

High resolution mode - “H” command accesses increased resolution.

Calibration - Alternate span points can simplify field calibration using less than full capacity weights.

Overload protection- Overload stops located in base of scale.
Helps to protect load cell and extend the scale's life.

Simple to use - Reduces operator training time.

RS-232 cable- Allows you to connect to a PC.

Scale or Weight Classifier configurations are internally configurable.

Specifications:
Dimensions
14( L) x 12( W) x 4.1( H)

Capacity: 150 lbs

Construction
Stainless steel weight platter and a painted die cast aluminum base

Controls
Zero - With Auto zero tracking for zeroing the scale Test- Runs a diagnostic program to assure the scale is fully functional

Weight
23 lbs

Power
120 VAC +10% - 15%, 60Hz, standard 3 wire ground

Agencies
NTEP approved for NIST Handbook 44
Class III commercial applications (COC # 95-070A5)
Canadian Weights and Measures (# AM-5076)
CSA/CAN C22.2 M950

Operating environment 42 to 104 F (5 C to 40 C), Class III device Humidity 10% to 95% RH, non-condensing

Input/Output RS-232, bi-directional, configurable 1200 - 19.2K Baud.

Part #	Description
AWT05-508640	7820 150 lb flat platter ship wt 23lb (10kg) (replaces NCI 9503-16505)
10' RS232 Interface Cable (9 pin to 9 pin) included with each scale.

No rating yet... Be the first to rate this product!